How to calculate the estimated production by solar PV panels?

I know what is the irradiance in my region, therefore I know what is the maximum expected production when the solar panels are placed optimally (interestingly, the two links provide different optimal angles).

However, the direction of my roof and the tilt (slope) are fixed and likely not optimal.

How can I calculate the expected production given the abovementioned parameters?

PVWatts

PVWatts provides exactly what you're looking for.

It's a solar calculator maintained by the National Renewable Energy Lab of the U.S. Department of Energy. To use the tool:

1. Enter the location of the proposed solar system. PVWatts will show you nearby weather stations for the simulation, and uses the most relevant solar irradiation data.
2. Enter the system parameters. You can enter either basic info (size, orientation, angle) or provide more detail (inverter efficiency, system losses, etc). You can even draw an outline of your system on the satellite imagery of the proposed location.

The results include monthly solar radiation and AC power production values. If you included your utility rate, it will provide the value of this power as well. You can also download hourly data which includes much more detailed information on irradiance and factors such as temperature and wind speed which affect the output.

PVWatts has up-to-date, high-resolution solar irradiance data is for most of North America, the northern half of South America, and the Indian subcontinent. For other parts of the world, older and less precise data sets are used which vary by location. These aren't as accurate as the NREL data, but suitable for rough estimates.

A note on optimal angles

The reason you're getting different answers is probably because the definition of "optimal" for a given location varies according to preference. Are you looking for:

• Any easy-to-remember formula? Install the panels at latitude tilt.
• Greater energy output over the course of the year? Consider laying them a bit flatter.
• Greater power output in the winter? Lay them a bit steeper.
• Less need to clean the panels off? Steeper still.

The topic likely deserves a separate question, but for your purposes playing around with PVWatts will hopefully give you the guidance you need.

• I was preparing an Excel file. Is there a formula I can use the correction factors for tilt and orientation?
– FarO
Commented Jul 26, 2018 at 12:57
• Not sure exactly what you're asking, but the PVWatts technical manual goes through the calculations step by step.
– LShaver
Commented Jul 26, 2018 at 13:04

In Europe a tool from the Joint Research Center of the European Commission is also available:

https://re.jrc.ec.europa.eu/pvg_tools/en/tools.html

The tool takes into account location, placement, horizon (if you upload a CSV file with the profile of the horizon in your installation location, to take into account shadows), efficiency of the solar panels and so on.

The tool can also suggest optimal tilt and azimuth for the specified location.